|
|
| Author |
Message |
franciskus
Joined: 27 Mar 2006
Posts: 213
|
 Posted: 07/25/07 - 06:52 Post subject: |
 |
|
| I got a problem with my new configuration. I got the new motherboard, memory and fan, so something is broken. I cannot boot my system. I cannot even see my power leds on the case. I didnt do anything with my power supply, or anything. Then, my previous memory module was PQI, so unplugged it and put the new one. Now, I am not sure that I put it right, because device wont go any further. |
|
|
Back to top
|
|
|
|
 |
aylmer
Joined: 07 Jan 2006
Posts: 165
|
| Posted: 08/08/07 - 03:31 Post subject: |
|
|
| Well, you should do the following. Check you led. See if it is connected to moteherboard, and check if there is a power on it. Rewire it just to be sure. Then, check if your hard drive is primary master, and its not making any conflict. Check all of your IDE drives, like your second hard drive if you have it, CD Rom, DVD burner. If you are using two devices on the same drive cable, thats bad. Unplug everything so you can rewire it correctly. What is the type of your new memory? Clean it, and place it again. Well, I dont know why it wont go any further, but I recommend you to see those module bases. Try with another place, if you have one free space left. Yes, remove cd media from your DVD burner, because.I mean just do it Now everything should be fine. |
|
|
Back to top
|
|
|
|
|
|
  |
All times are GMT
|
|
