samuel
Joined: 30 Sep 2006 Posts: 206
|
Posted: 10/07/07 - 21:17 Post subject: |
|
|
| Hello! This error message occurs when your hard drive is not connected properly (but you said that it is) or when your jumpers are not set correctly. So, you should check jumpers if they are set as master. If that is not case, then problem could be that your cmos not setup properly. Go to bios and change setup if there is need for that. If this is not case, too, then, you have a hardware problem with ide cable, motherboard or hard drive. |
|