booth
Joined: 19 Jan 2006
Posts: 5
|
 Posted: 05/20/08 - 03:20 Post subject: |
 |
|
| Hello! When you connect your computers to router, open browser on one of them and type following address: 192.168.1.1. After you typed this, form with user name and password will show up. By default user name is empty and password is admin, so, type it and press Enter key. After this, basic setup will appear. First from drop dawn menu choose Automatic configuration – DHCP. In Local IP Address type 192.168.1.1, in Subnet Mask type 255.255.255.0 and enable DHCP server. Also enter maximum of DHCP users (in your case 2). In section Time Zone from drop dawn list choose your Time Zone. Then click Wireless tab and there choose appropriate Wireless Network Mode and give Wireless Network Name. Then click Security tab and configure Firewall (in my router I have checked each option, except Filter Internet NAT Redirection). Then you can click Access Restrictions if you want to make some of them (I have not made any restriction). Then click Applications and Gaming if you want to forward ports in this purpose. Then click Administration and there you can create your own user name and password and choose connection to the server (I have choose HTTP). Also, enable here UPnP. When you click Status tab you will see relevant information about your router (MAC address, name of router, etc). Save your settings and get out. That’s it. |
|
